碳智錶 · equipment energy meter
Capture equipment energy and output data; additional measurement and control depend on version.
Explore features and requirementsEQUIPMENT × ENERGY × CONTINUOUS IMPROVEMENT
Understand energy. Improve operations.
Connect equipment energy use, production status and improvement verification. ATSAVE combines on-site measurement with Carboka software to identify waste, establish baselines and guide improvement.
Start with one machine, one site or one improvement.
CARBOKA / ENERGY BOARD
01 / START HERE
What do you want to improve?
Choose a starting point around your operational needs, then use data to guide the next action.
01
Where is energy being used?
Map energy use across equipment and sites to identify standby, idle operation and unusual periods.
Explore the solution 02How does energy relate to output?
Connect energy, equipment status and output for an OEE+E and per-unit energy view.
Explore the solution 03Did the improvement work?
Agree on measurement boundaries and baselines before comparing performance.
Explore the solution02 / CARBOKA SOFTWARE
Three service modules, built around your questions
Focused workspaces for manufacturing, site operations and savings verification. The international Carbon × Kaizen experience uses simulations to explore the link between energy, products and improvement.
01 / INDUSTRY
Carboka Industry — manufacturing energy management
Connect equipment electricity to orders, MES good units, product energy flow and batch history.
Explore features and requirements
02 / SPACES
Carboka Spaces — site energy management
Check data quality, then review costs, opportunities, site differences and ECO.
Explore features and requirements
03 / VERIFY
Carboka Verify — energy savings verification
Link plans, baselines and review to customer results, traceable reports and evidence.
Explore features and requirements
EXPLORE / CARBON KAIZEN
Carboka International — Carbon × Kaizen experience
Explore product energy flow, size-specific ECO and Carbon × Kaizen through footwear simulation.
Explore features and requirementsDemos use synthetic data. Deployment is scoped to your data, permissions and site conditions.
Software overview and selection guide03 / FIELD DEVICES
On-site devices: where the data begins
Choose the right combination for the signals, interfaces and installation conditions at your site.
智能管 · energy edge controller
Integrate equipment signals, counting, status detection and control logic at the edge.
Explore features and requirements智聯燈 · connected signal light
Make equipment status visible through light signals to help identify and track exceptions.
Explore features and requirements04 / FROM DATA TO ACTION
Three steps to a practical starting point
Understand your equipment and goals first, then plan measurement, software and improvement scope.
- 01
Define the problem
Describe your equipment, site, available data and priority problem.
- 02
Establish a baseline
Confirm boundaries, data quality and time periods, then choose a suitable assessment or measurement approach.
- 03
Plan the improvement
Use measurement results to discuss actions and agree on tracking and verification.
Bring your operational challenge to the conversation
Tell us your current challenge so we can identify the right starting point: assessment, measurement or software implementation.